Zendure SolarFlow 2400 AC + 6× AB3000X (17.28 kWh)

A complete set for homes with existing solar panels that want the maximum storage of the 2400 AC system, for a large household or a large PV installation. With six modules, this is the maximum configuration of the 2400 AC. The standard output through a socket is 800 W; up to 2,400 W is possible after an electrician's assessment.

Why choose this Zendure SolarFlow 2400 AC + 6× AB3000X?

• 17.28 kWh of storage in a set you can install yourself in an afternoon: stack the modules, plug it in and pair the app
• Up to 2,400 W charging and discharging, enough for larger appliances such as a dishwasher or induction hob (800 W as standard through a socket; 2,400 W after an electrician's assessment)
• Maximum configuration: six AB3000X modules, 17.28 kWh in total, without extra wiring between modules
• IP65 and self-heating batteries between −20 and 0 °C: suitable for a garage, utility room or sheltered outdoor location
• An off-grid socket supplies connected appliances during a power cut: up to 2,400 W continuously, with a 3,600 W peak for 10 seconds
• LiFePO4 cells rated for 6,000 cycles, a fire suppression system in each module and a 10-year manufacturer's warranty

How does it work?

The SolarFlow 2400 AC is the inverter and controller. It sits on top of the AB3000X battery modules and plugs into a fixed wall socket. During the day, the set stores surplus solar energy; in the evening and at night, it supplies that energy to your home. A compatible meter measures household consumption so the battery can adjust its output and reduce both export and grid imports.

What is included?

1× SolarFlow 2400 AC and 6× AB3000X battery modules of 2.88 kWh each: 17.28 kWh nominal capacity in total. A meter for automatic control is not included; choose one separately. We recommend the Zendure Smart Meter P1.

Expanding

With six AB3000X modules, this set is the maximum configuration of the 2400 AC (17.28 kWh). For more storage, combine a second SolarFlow 2400 AC system. The AB3000L is not compatible with the 2400 AC.

Smart control

Use the Zendure app to monitor charging, discharging and consumption in real time. ZENKI, Zendure's energy management system, can adapt charging and discharging to a dynamic electricity contract. An official Zendure integration is available for Home Assistant. Three units can serve a three-phase home together.

Safety and durability

LiFePO4 cells, aerosol fire suppression in each AB3000X module and protection against overvoltage, overcurrent and overheating. The system is rated IP65, except while the off-grid socket is in use. The batteries heat themselves automatically between −20 and 0 °C.

Backup power

During a power cut, the unit's off-grid socket can power appliances connected to it: up to 2,400 W continuously and a 3,600 W peak for 10 seconds. It does not provide backup power to your whole home.

In the box

• SolarFlow 2400 AC
• 3 m AC cable
• 2 wall brackets and 2 expansion bolts
• 4 battery brackets and 4 M4 screws
• Key
• Manual
• 6× AB3000X battery modules, each with a manual

Documents

• SolarFlow 2400 AC manual (NL/EN/FR)
• AB3000X manual (NL/EN)
• SolarFlow 2400 AC EU declaration of conformity
• AB3000X EU declaration of conformity
• Grid connection certificate EN 50549-1/-10
• Synergrid declaration GLV300-03 (SolarFlow 2400 AC)

Frequently asked questions

Technical data was checked against Zendure's official website, manual and datasheet, most recently on 29 September 2026. Where sources differ, we state the more cautious figure.